• Send Us a Message
  • Skip to content

    WSRD Stock Injector Packages | 2020-2026 Polaris Pro XP, Turbo R & Pro S (238-265HP)

    by WSRD
    Original price $729.00 - Original price $749.00
    Original price
    $729.00
    $729.00 - $749.00
    Current price $729.00
    Choose a Application
    Choose a Flash Device

    What's Included?

    • Your Choice of Flash Device (DynoJet Power Vision or WSRD RTD Flash Utility)
      ~ WSRD Stock Injector Calibrations (Includes 91, 93 & 98+ Octane Fuels)

    When purchasing the DynoJet Power Vision all WSRD Stock Injector Tune Files are pre-loaded.

    Power Production & Boost:

    • WS215 - 91 Octane: 214.2 Hub Horsepower - 238 Crank Horsepower | 19-19.5 PSI of Boost
    • WS230 - 93 Octane: 229.3 Hub Horsepower - 254 Crank Horsepower | 20-20.5 PSI of Boost
    • WS240 - 98+ Octane: 239.1 Hub Horsepower - 265 Crank Horsepower | 23 PSI of Boost

    A crack pressure adjustment for these tunes utilizing the stock wastegate actuator is NOT required. (Factory crack pressure should be set to 6 PSI.)

    Acceptable Fuel Types;

    • 91 Octane | Premium 91 Octane - 10% Ethanol (90/91 Octane Rec fuels can be used)
    • 93 Octane | Premium 93 Octane - 10% Ethanol (91/Race Gas blends are acceptable)
    • 100 Octane | VP UTV96 or Sunoco 100
    • 110 Octane | VP MS109 or Sunoco 110

    WSRD Tune Features:

    • Radiator fan activation temp lowered from ~200* F to ~175* F
    • Torque limits for L raised to 100%, reverse raised to 75%
    • Component protection mode for fueling lowered to increase torque and horsepower, especially right after the pedal is floored.
    • Ignition timing per cylinder is optimized for maximum power as well as drive-ability, careful consideration was used not only for when at wide open throttle, but as well as cruise, throttle transitions, ect.
    • Throttle feel and control is thoughtfully improved, to control through a whoop section, on/off feel in short course style racing or playing in the woods, eco mode is improved but offers the less aggressive pedal for technical rock sections or simply loading on a trailer.
    • Speed limits removed (your speed limit is your rev limiter/gear)
    • Rev limiter raised to 9200 RPM
    • Rough road detection is raised to max to prevent power loss
    • Plus more!
    Dyno Graph - Pro XP & Turbo R

    Dyno Graph - Pro XP & Turbo R

    Through development, and testing over the last few years we have found that stock machines range from 190 Hub Horsepower to nearly 200 Hub Horsepower, as shown in the dyno graph.
    Even with the Can-Am X3 Models it has been tested that manufacturer advertised horsepower numbers may be higher or lower than reported.

    Net Orders Checkout

    Item Price Qty Total
    Subtotal $0.00
    Shipping
    Total

    Shipping Address

    Shipping Methods