This Launch Control Module does NOT work on 2023 200HP Turbo RR Models. BRP made an ignition coil change in 2023, therefore changing the ignition coil connector. As of 2/1/24 DynoJet is still working on a harness solution for these models.
The P-Drive High Engagement Primary Spring is finally here!
The WSRD Launch Control Module(LCM) is designed to allow the machine to have a controlled, consistent launch rpm by cutting ignition at the desired rpm, as well as build boost by controlling ignition retard. This unit can be added to any machine or any ones tuning and allows the user to be able to fine tune the launch rpm and how aggressive the machine will leave.
Launch Control Operation:
WSRD LCMs come standard with an operations delay
Older LCMs came configured with a three second delay between pushing the activation button and actual LCM activation
WSRD has updated this to now include a one second delay as of Feb. 1st, 2022
For proper operation please press the LCM momentary switch, wait one second and then apply gas pedal for LCM activation
The WSRD LCM has the ability to retard up to 40*. The ignition retard allows for more heat in the exhaust which assists the turbos shaft speed creating more boost.
The WSRD LCM will be sent with our standard setting of 2200 RPM cut with -30* of retard. We also offer a 2600 RPM setting that can come preloaded. This can be modified by the user. With our Max Effort LCM we can configure and assist the user with setup and if using our tune, combine both the LCM and our tuning for best results.